Cutting cells for the food industry

Idasa manufactures and markets the models of table of coordinates XY Idafood water cut for solutions of water jet cut in fresh and frozen Produits.
It incorporates a new structure, as much in the design of the bridge as in the water vacuum system and the cutting particles. Totally made in light stainless steel and bigger stiffness enables to decrease considerably the inertias in the high levels of speed.

The maximum speed of displacement in XY is 60 m./min. for the fast displacements in vacuum.The structure of the bridge in can be incorporated multiple cutting heads in those special applications that may need it or in systems of a very high production.

One of the many innovations incorporated to the Idafood tables is the soundproofing of the water jet. The water jet is thrown at more than two match of speed causing a deafening noise. Thanks to the “Silent” system the noise produced during the cutting process is reduced at 32 decibels during the cutting process, achieving a pleasant and safe work atmosphere.

Main advantages:

- No cutting tools
- Omni directional cuts
- Elimination of internal tensions
- High cut speed
- Cutting radios and intricate contours up to 0,50 mm.
- Total automatism and robotization
- Attainment of multiple cuts
- Polyvalent cut on any kind of product
- Almost null maintenance
- Non specialized personnel
- No defoliation, delaminating or tear
- Cold cut and without waste
- Low consumption of the cutting fluid

In this section (see sub menu):

- Introduction to the robotic cells >
- Palletitzation robotic cells >
- Charge et décharge reels cart >
- Fours lines >
- Flambage robotic cells >
- Ponçage robotic cells >
- Manipulation robotic Pinces >
- Application de Hotmeld Application >
- Dashboard manipulation automation industry >
- Camshaft manipulation >

Over this lines:
Coupe Waterjet table 2D IdaFood™ for the food industry.

Produits >